HOME
클릭해서 제품 크게보기최대 6CH, 모터 등의 전력 변환 효율의 고정확도 계측
- 제조사
- HIOKI
- 제품명
- POWER ANALYZER PW6001
- 제품번호
- PW6001
전력 기본 확도 ±0.05％ 실현 (전류 센서 확도를 가산하여도 ±0.075%)
높은 노이즈 내성과 높은 안전성 (80dB / 100kHz CMRR, ±0.01%/℃ 온도 특성)
변동이 큰 부하에도 정확한 측정을 실현, True HD 18bit
최고 확도를 유지하며 10ms의 데이터 갱신을 구현(전용 IC를 통한 독립/동시 측정)
DC 기본 확도 ±0.07%, 정확하고 안정적인 효율 측정
정확한 주파수 해석을 실현한 고속 SAMPLING, 5MS/s
6CH 모델 2대의 real time 동기화로 최대 12ch구현
오실로스코프를 대체하는 충실한 파형해석, 모터 해석 전용의 TRIGGER기능
1.5MHz의 대역, 최대 100차까지 광대역 고조파 해석이 가능
[CH 수, D/A출력 및 모터 해석 기능 유무에 따른 모델 구분]
PW6001-01 : 1CH
PW6001-11 : 1CH, 모터 해석, D/A 출력
PW6001-02 : 2CH
PW6001-12 : 2CH, 모터 해석, D/A 출력
PW6001-03 : 3CH
PW6001-13 : 3CH, 모터 해석, D/A 출력
PW6001-04 : 4CH
PW6001-14 : 4CH, 모터 해석, D/A 출력
PW6001-05 : 5CH
PW6001-15 : 5CH, 모터 해석, D/A 출력
| PW6001-06 : 6CH |
PW6001-16 : 6CH, 모터 해석, D/A 출력
| Measurement line type | Single-phase 2-wire, single-phase 3-wire, three-phase 3-wire, three-phase 4-wire | |
| Number of input channels | Max. 6 channels; each input unit provides 1 channel for simultaneous voltage and current input (Voltage measurement unit: Photoisolated input, resistance voltage divider, Current measurement unit: Isolated input from current sensor) | |
| Measurement items | Voltage (U), current (I), active power (P), apparent power (S), reactive power (Q), power factor (λ), phase angle (φ), frequency (f), efficiency (η), loss (Loss), voltage ripple factor (Urf), current ripple factor (Irf), current integration (Ih), power integration (WP), voltage peak (Upk), current peak (Ipk) | |
| Harmonic measurement: Harmonic active power, select calculation order from 2nd order to 100th order | ||
| Waveform recording: Voltage and current waveforms/ Motor pulse: Always 5 MS/s Motor waveforms: Always 50 kS/s, 16 bits Recording capacity: 1 Mword × ((voltage + current) × number of channels + motor waveforms) | ||
| Motor analysis (PW6001-11 to -16 only): Voltage, Torque, Rotation, Frequency, Slip, or Motor output | ||
| Measurement frequency | 4 Hz to 8 MHz (5 digits setting resolution, minimum resolution 10 mHz) | |
| Measurement signal level | Voltage range: 6 to 1500 V, 8 ranges Current range (Probe 1) : 400 mA to 1 kA (depends on current sensor) Current range (Probe 2) : 100 mA to 50 kA (depends on current sensor) Power range: 2.40000W to 4.50000MW (depends on combination of voltage and current range) Frequency range: 0.1 Hz to 2 MHz | |
| Basic accuracy | Voltage: ±0.02 % rdg. ±0.02 % f.s. Current: ±0.02 % rdg. ±0.02 % f.s. + current sensor accuracy Active power: ±0.02 % rdg. ±0.03 % f.s. + current sensor accuracy | |
| Synchronization frequency range | Power measurement: 0.1 Hz to 2 MHz Harmonic measurement: 45 Hz to 66 Hz (IEC standard mode), 0.1 Hz to 300 kHz (Wideband mode) | |
| Frequency band | DC, 0.1 Hz to 2 MHz | |
| Data update rate | Power measurement: 10 ms/ 50 ms/ 200 ms Harmonic measurement: 200 ms (IEC standard mode), 50 ms (Wideband mode) | |
| Data save interval | OFF, 10 msec to 500 msec, 1 sec to 30 sec, 1 minute to 60 minutes User-selected from all measured values, including harmonic measured values, Specified measured values can be saved in internal memory or USB flash drive | |
| External interfaces | USB (memory), LAN, GP-IB, RS-232C, External control ,Synchronization control | |
| Power supply | 100 to 240 V AC, 50/60 Hz, 200 VA max | |
| Dimensions and mass | 430 mm (16.93 in)W × 177 mm (6.97 in)H × 450 mm (17.72 in)D, 14 kg (49.4 oz) (PW6001-16) | |
| Accessories | Instruction Manual ×1, Power cord ×1, D-sub connector × 1 (PW6001-1x only) |
