모던인텍 - 제품 품목별

클릭해서 제품 크게보기

최대 6CH, 모터 등의 전력 변환 효율의 고정확도 계측

제조사: HIOKI

제품명: POWER ANALYZER PW6001

제품번호: PW6001

견적문의 카달로그

PRODUCT INFO. 제품상세정보

제품특징
기본사양
제품옵션

전력 기본 확도 ±0.05％ 실현 (전류 센서 확도를 가산하여도 ±0.075%)

높은 노이즈 내성과 높은 안전성 (80dB / 100kHz CMRR, ±0.01%/℃ 온도 특성)

변동이 큰 부하에도 정확한 측정을 실현, True HD 18bit

최고 확도를 유지하며 10ms의 데이터 갱신을 구현(전용 IC를 통한 독립/동시 측정)

DC 기본 확도 ±0.07%, 정확하고 안정적인 효율 측정

정확한 주파수 해석을 실현한 고속 SAMPLING, 5MS/s

6CH 모델 2대의 real time 동기화로 최대 12ch구현

오실로스코프를 대체하는 충실한 파형해석, 모터 해석 전용의 TRIGGER기능

1.5MHz의 대역, 최대 100차까지 광대역 고조파 해석이 가능

[CH 수, D/A출력 및 모터 해석 기능 유무에 따른 모델 구분]

PW6001-01 : 1CH

PW6001-11 : 1CH, 모터 해석, D/A 출력

PW6001-02 : 2CH

PW6001-12 : 2CH, 모터 해석, D/A 출력

PW6001-03 : 3CH

PW6001-13 : 3CH, 모터 해석, D/A 출력

PW6001-04 : 4CH

PW6001-14 : 4CH, 모터 해석, D/A 출력

PW6001-05 : 5CH

PW6001-15 : 5CH, 모터 해석, D/A 출력

PW6001-06 : 6CH

PW6001-16 : 6CH, 모터 해석, D/A 출력

	Measurement line type	Single-phase 2-wire, single-phase 3-wire, three-phase 3-wire, three-phase 4-wire
	Number of input channels	Max. 6 channels; each input unit provides 1 channel for simultaneous voltage and current input (Voltage measurement unit: Photoisolated input, resistance voltage divider, Current measurement unit: Isolated input from current sensor)
	Measurement items	Voltage (U), current (I), active power (P), apparent power (S), reactive power (Q), power factor (λ), phase angle (φ), frequency (f), efficiency (η), loss (Loss), voltage ripple factor (Urf), current ripple factor (Irf), current integration (Ih), power integration (WP), voltage peak (Upk), current peak (Ipk)
		Harmonic measurement: Harmonic active power, select calculation order from 2nd order to 100th order
		Waveform recording: Voltage and current waveforms/ Motor pulse: Always 5 MS/s Motor waveforms: Always 50 kS/s, 16 bits Recording capacity: 1 Mword × ((voltage + current) × number of channels + motor waveforms)
		Motor analysis (PW6001-11 to -16 only): Voltage, Torque, Rotation, Frequency, Slip, or Motor output
	Measurement frequency	4 Hz to 8 MHz (5 digits setting resolution, minimum resolution 10 mHz)
	Measurement signal level	Voltage range: 6 to 1500 V, 8 ranges Current range (Probe 1) : 400 mA to 1 kA (depends on current sensor) Current range (Probe 2) : 100 mA to 50 kA (depends on current sensor) Power range: 2.40000W to 4.50000MW (depends on combination of voltage and current range) Frequency range: 0.1 Hz to 2 MHz
	Basic accuracy	Voltage: ±0.02 % rdg. ±0.02 % f.s. Current: ±0.02 % rdg. ±0.02 % f.s. + current sensor accuracy Active power: ±0.02 % rdg. ±0.03 % f.s. + current sensor accuracy
	Synchronization frequency range	Power measurement: 0.1 Hz to 2 MHz Harmonic measurement: 45 Hz to 66 Hz (IEC standard mode), 0.1 Hz to 300 kHz (Wideband mode)
	Frequency band	DC, 0.1 Hz to 2 MHz
	Data update rate	Power measurement: 10 ms/ 50 ms/ 200 ms Harmonic measurement: 200 ms (IEC standard mode), 50 ms (Wideband mode)
	Data save interval	OFF, 10 msec to 500 msec, 1 sec to 30 sec, 1 minute to 60 minutes User-selected from all measured values, including harmonic measured values, Specified measured values can be saved in internal memory or USB flash drive
	External interfaces	USB (memory), LAN, GP-IB, RS-232C, External control ,Synchronization control
	Power supply	100 to 240 V AC, 50/60 Hz, 200 VA max
	Dimensions and mass	430 mm (16.93 in)W × 177 mm (6.97 in)H × 450 mm (17.72 in)D, 14 kg (49.4 oz) (PW6001-16)
	Accessories	Instruction Manual ×1, Power cord ×1, D-sub connector × 1 (PW6001-1x only)